Tags :tutorial Page 72

Today\’s SPB 16.2 release is significant for the Cadence Allegro and OrCAD families of products, but more importantly, I think it brings a lot of new functionality for PCB designers. I will be talking about the improvements in this release over a few blog posts in coming days and weeks. First and foremost, we have added a Constraint Driven PCB Design Flow for build-up designs to accelerate miniaturization. As you know, customers in high-end consumer electronics market place, mobile phone makers, GPS navigation system makers have been dealing with miniaturization for quite some time now and have been using build-up process to fabricate PCBs. With smaller and smaller pin pitch BGAs being introduced — with 0.8 mm pin pitch or...

CST MICROSTRIPES™ is a powerful 3D electromagnetic simulation tool, used extensively for solvingchallenging radiation problems including complex antenna structures, installed performance, EMC/EMI/E3issues and more.Users of CST MICROSTRIPES™ 2009 (CST MS) will find a modernized interface which has been greatlysimplified by merging the Build tool, model history and parameterization into the Project/Command Window,making it easier to run parameter sweeps and queue simulations. CST MS’ new tabbed toolbars de-clutter theuser interface and improve navigation through the tool. The icons have been completely re-designed to bemore intuitive and consistent with those used in CST STUDIO SUITE 2009, making it easier to transitionbetween the tools.Performance EnhancementsThe entire CST MS package including the Build tool, TLM solver and Field Plotter is now 64-bit enabled,extending the...

=============================================HFSS is now able to export surface and volume losses in .xml file format for linking to an ANSYS Mechanical v12 thermal analysis. DXF files can now be imported with .tech layer mapping files. ANSft00084239 – Users can now run a non-graphical batchsolve of an analysis that                 requires a datalink between designs.  Version 11.1.3 Bug Fixes========================ANSft00083110 – Data table reports will now load more efficiently.ANSft00083445 – Port field lines now honor the calibration line defined on the port in                 cases where the mesh is copied from another solution.ANSft00083190 – Expressions for excitation phase that do not contain units will no longerbe assigned a constant value in degrees after saving and closing the project.ANSft00082977 – Triangle nodes could inadvertently...

Sentaurus Process is an advanced 1D, 2D, and 3D process simulator for developing and optimizing silicon and compound semiconductor process technologies. Created by combining the best-in-class features from Synopsys and former ISE TCAD products, together with a wide range of new features and capabilities, Sentaurus Process is a new-generation process simulator for addressing the challenges found in current and future process technologies. Equipped with a set of advanced process models, which include default parameters calibrated with data from equipment vendors, Sentaurus Process provides a predictive framework for simulating a broad range of technologies from nanoscale CMOS to large-scale high-voltage power devices. Sentaurus Process is part of the comprehensive Synopsys suite of core TCAD products for multidimensional process, device, and system...

AVO is designed to analyze the fluid content of reservoir rocks through a combination of visual, analytical and modeling processes of the seismic and well data. The program provides an intuitive capability to manage, display and operate on seismic gather data for AVO attribute generation and crossplotting. eLOG is a comprehensive well log editing and modeling tool designed to prepare or create log data for use within the Hampson-Russell suite of applications. New and edited data can be saved within the project, exported as new well data or transferred through direct binary links to third party applications. EMERGE is designed to predict reservoir properties using seismic attributes and well log data. The technique trains on target data at the well...

Maxwell 12.1 Release notes========================== New Features/Improvements in 12.1================================= 3D Meshing———-A new mesh making algorithm has been added for Maxwell 3D. In the Maxwell 12.1 release this new mesh maker is only used for 3D transient models with rotational motion. It greatly increases the success rate for meshing 3D rotational motion problems with small air gaps and produces a much higher quality mesh on the band interface. [You can also turn on this mesh algorithm in 3D magnetostatic and eddy designs. Under 慏esign Settings?in the new 態and Meshing?tab you can 慹nable band mesh? With this option enabled you can assign a band object to create a dummy motion setup. This motion setup is only used to give the meshmaker information about...

BOSS International provides the most powerful, comprehensive engineering software on the market today. We make it our business not only to provide cutting-edge software products, but to continually refine and improve those products as well. Our developers are constantly working to implement new features and streamline functionality. By striving to improve our products, we are better able to serve our customers and increase their productivity.Product:BOSS StormNET 4.18 Lanaguage:english Platform:Winxp/Win7 Size:148MB

::::::English Description:::::: Magics is the key element of the Magics e-RP Suite, a full range of market-leading software products that will streamline, automate and boost almost every step in your RP&M process.            Magics software enables you to import a wide variety of CAD formats and to export files ready for rapid prototyping, tooling and manufacturing. Its applications include repairing and optimising 3D models; analyzing parts; making process-related design changes on your STL files; designing fixtures; documenting your projects; production planning and much more. product:MATERIALISE MAGICS 13 Lanaguage:english Platform:Winxp/Win7 Size:86MB

Ansoft Simplorer 8.0 is a multi-domain system simulation software program. It is used for the design, modeling, analysis and optimization of high-performance systems that include electrical, thermal, electromechanical, electromagnetic, and hydraulic designs. These complex systems are commonly found in the automotive, aerospace/defense, and industrial automation industries. Simplorer provides a wide range of modeling techniques, analysis capabilities, and post processing. This enables the engineer to investigate system functionality, performance, and overall design verification. The result is a dramatic reduction in development time and cost, increased system reliability and system optimization. New in Simplorer v8   Next generation User Interface Advanced Model Editing Characterization tools Enhanced Spice and Pspice model import New component library concept Expanded VHDL-AMS functionality Enhanced Solver Performance Enhanced...

HyperLynx® Signal Integrity enables engineers to quickly and accurately analyze and eliminate signal integrity and EMI/EMC design problems early in the design cycle. HyperLynx Signal Integrity comes ready to use in virtually any PCB design flow and offers unprecedented time-to-results, improving productivity, reducing development and product costs, and increasing product performance.Signal integrity (SI) analysis is an essential part of modern electronic design. Increasingly fast edge rates in today’s integrated circuits (ICs) cause detrimental high-speed effects, even in PCB designs running at low operating frequencies. As driver ICs switch faster, a growing volume of boards suffer from signal degradation, including over/undershoot, ringing, glitching, crosstalk, and timing problems. When degradation becomes serious enough, the logic on a board can fail. Hardware engineers,...