Professional Software Archive

How Unite Technology supports more effective CAD Consolidation: Easily reuse existing CAD data as is, in its current format, with no need for a costly upfront migration Convert existing legacy data to PTC Creo easily, on demand, and only when modifications are actually needed No need to convert entire assemblies to modify individual parts, simply convert parts as changes are required How Unite Technology supports more effective CAD Collaboration: Open SolidWorks®, CATIA® and NXTM files directly in PTC Creo without the need for additional software Import SolidWorks, CATIA, NX, Solid Edge® and Autodesk® Inventor® files into PTC Creo without the need for additional software Enable higher levels of concurrent engineering between the product development teams and suppliers/partners/customers by allowing designers...

DIGICORP Ingegneria produce e vende software tecnici per il mondo della progettazione e contabilizzazione di opere civili sul territorio. Affidabilità, semplicità e elasticità da sempre caratterizzano i nostri prodotti che da oltre vent\’anni vengono sviluppati sulla base dell\’esperienza tecnica maturata dall\’attività professionale.Product:DIGICORP Ingegneria Civil Design v10.0 for Autodesk AutoCAD 2015 Lanaguage:english Platform:Win7/WIN8 Size:258 MB

all-in-one solution for the rapid analysis and design of any concrete slab or beam frame – post-tensioned or conventionally reinforced. The new release not only enhances the workflow of ADAPT-PT, but it also combines the features of ADAPT-PT and RC into one, flexible product. This lets structural engineering firms consolidate their workflow, stay high on their learning curve for all project types, only pay for ongoing maintenance on one software, and ultimately save time and money. New features include: – One program for PT and RC strip analysis. Easily compare design approaches for the most economy of design – Windows 8 compatibility – Soft licensing option with detaching of license (RC was behind in this respect for detaching) and virtual...

Pipedate Pro is a computer program that increases efficiency in piping design and lightens the burden of looking up piping information. A valuable asset in the Piping Designers inventory, Pipedata Pro offers an intuitive, hassle free retrieval of up-to-the-minute piping and design data. Display units can be set to imperial or metric. Introduced in 1996 by Zeataline Projects, Pipedata Pro now has a global presence. Clients include: WorleyParsons, Foster Wheeler, Jacobs, KBR, JGC, Shell and Mobile. Mapped versions of Pipedata Pro piping tables are used in the products of Alias Ltd, the company behind Isogen, Spoolgen and I-Sketch, and by AVEVA who produce PDMS, the 3D plant modeling suite. Pipedata Pro has been reviewed by ASME B31 Mechanical Design Committee,...

Die Design, Mold Wizard, Engineering Die Wizard, Progressive Die Wizard – a set of databases and standard components for the design of dies and molds in the environment NX 10Moldability validation checkingNX Molded Part Validation enables you toexamine 3D part models so you can identifyfeatures that could compromise the injection molding process. The automatedchecking allows you to identify draftangles, undercut areas, sharp corners andsmall radiuses, and other issues that canimpede successful molding. In addition,this part validation function providesdesigners with an easy visual check of thecore and cavity that doesn’t require specialanalysis or knowledge of mold design.Molded part validation is used to analyzethe thickness of part models, providingdesigners with color-coded visual feedbackon the thickness distribution. The information helps designers control cooling...

Antennas:The antennas listed below are available in the Antenna Magus database. For each of these antennas, Antenna Magus offers detailed information, synthesis algorithms, performance estimations and ready-to-run simulation models.he dielectric-loaded folded half-loop antenna (DLFHLA) is a variation of the folded loop antenna, where a half-loop is folded around a dielectric block to reduce the antenna size. Mainly used for WiFi applications, the DLFHLA is a self-balanced structure. This means that currents flowing on the ground plane are reduced while still maintaining good performance – a trait which makes the DLFHLA a very good candidate for MIMO (Multiple Input Multiple Output) applications. As such, the DLFHLA provides improved isolation between multiple antennas mounted on the same ground plane when compared to...

ltera’s latest design software release, Quartus® II software v14.1, now supports both Generation 10 devices – Arria® 10 and MAX® 10 – in a single download. The support for Arria 10 and MAX 10 devices are summarized in Table 1. Table 1. Quartus II Software v14.1 Support for Arria 10 and MAX 10 Devices Device DescriptionArria 10 All Arria 10 devices: GT, GX (except 10AX032 and 10AX027), and SX (except 10AS032 and 10AS027)Final pin-outsSoC supportDigital signal processing (DSP) hardened floating-point implementationSmart voltage IDEarly access to the Hybrid Memory Cube (HMC) intellectual property (IP) coreMAX 10 Final pin-outsVertical migration supportEnhanced Flash MegaWizardTM support for new modes such as configuration flash memory (CFM) and user flash memory (UFM)New Analog Toolkit for evaluating...

Gibbs continually works closely with key CAD partners to ensure that you\’ll experience seamless interoperability with their products. In recognition of its high level of interoperability, GibbsCAM has received certification from Autodesk, Solid Edge and SolidWorks.The GibbsCAM 5-Axis Option supports simultaneous 4- and 5-axis machining with various tool types. In combination with GibbsCAM MTM, it also supports sophisticated multi-task machines with live tooling on articulated heads. It includes various machining styles and machining strategies for roughing and finishing, with full tool-axis control, plus application-specific functions such as projection, swarf, electrode, impeller, turbine and cylinder-head machining. For additional accuracy, the 5-axis Option provides collision detection and gouge checking for various tool shapes, with appropriate avoidance options. Toolpath is verified, on the...

The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results. From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier – intuitive drawing commands allow for the rapid generation of floor and elevation...

INSIM\’S DESIGN II FOR WINDOWS PROCESS SIMULATION SOLUTION RIGOROUS PROCESS SIMULATION FOR CHEMICAL AND HYDROCARBON PROCESSES INCLUDING REFINING, REFRIGERATION, PETROCHEMICAL, GAS PROCESSING, GAS TREATING, PIPELINES, FUEL CELLS, AMMONIA, METHANOL, SULFUR AND HYDROGEN FACILITIES The Easy Way To Do SimulationMicrosoft® Windows® has become the standard for desktop graphical computing and WinSim\’s DESIGN II FOR WINDOWS was the first process simulator developed specifically for Windows computing. DESIGN II FOR WINDOWS has been leading the way in this technology since 1991. Instant UsabilityOne click and you\’ll be convinced: DESIGN II FOR WINDOWS is the easy way to do simulation. WinSim\’s original process simulator for Windows is intuitive and inter-operable with other Windows applications. Its look and feel provides an instant familiarity for experienced...