Latest release Page 505
MSC CoSim 2020 MSC CO-SIMULATION TECHNOLOGIES Depending on the type of analysis, engineers can use MSC solutions in two ways – Co-Simulation (applying multiple physics to the model simultaneously) or Chained Simulation (passing load case results from one analysis to the next). 1. MSC CoSim Engine The MSC CoSim Engine has been developed in order to provide a co-simulation interface for the direct coupling of different solvers/disciplines with a multi-physics framework. This first version, readily available today, enables engineers to set up co-simulation models between Adams, Marc and scFLOW. 2. Other Open Co-Simulation Solutions Besides the CoSim Engine, MSC also supports a list of other co-simulation methodologies, including the Functional Mock-up Interface (FMI), Adams Marc Co-Simulation Interface (ACSI) and so...
MSC Marc 2020 Marc is a powerful, general-purpose, nonlinear finite element analysis solution to accurately simulate the product behavior under static, dynamic and multi-physics loading scenarios. Marc\’s versatility in modeling nonlinear material behaviors and transient environmental conditions makes it ideal to solve your complex design problems. Marc is ideal for product manufacturers looking for a robust nonlinear solution. It has capabilities to elegantly simulate all kinds of nonlinearities, namely geometric, material and boundary condition nonlinearity, including contact. It is also the only commercial solution that has robust manufacturing simulation and product testing simulation capabilities, with the ability to predict damage, failure and crack propagation. Combined with its multi-physics capabilities that help you couple thermal, electrical, magnetic and structural analyses,...
ANSYS SCADE 2020 R2 The Ansys development team announces enhancements to its latest release of SCADE 2020 R2 is a product line of the ANSYS Embedded software family of products and solutions that empowers users with a Model-Based Development Environment for critical embedded software. This new release provides you with functional enhancements and new tools. SCADE Suite is part of the Ansys Embedded Software product line, which empowers users with a Model-Based Development Environment for critical embedded software.With native integration of the formally-defined SCADE language, SCADE Suite is the integrated design environment for critical applications spanning requirements management, model-based design, simulation, verification, qualifiable/certified code generation, and interoperability with other development tools and platforms. SCADE Suite is tightly integrated with other...
Mentor Graphics QuestaSim 2020.1 Mentor, a Siemens business, is pleased to announce the availability of QuestaSim 2020.1 comprehensive platform for verification complex designs. Questa is built on a core simulation and debug engine providing the industry’s most complete native support of Verilog, SystemVerilog, VHDL, SystemC, PSL and UPF. Release Notes for QuestaSim 2020.1 – Date: Jan 28 2020 New Features Contained in this Release: – Improved SystemVerilog performance, syntax support, extensions – Improved VHDL performance defaults – SystemC 2.3.2 support and default – Visualizer Debug high performance and capacity (VIS) – Coverage – adaptive exclusions, multibit expressions, FSM, toggle improved – Coverage – new reporting switch from 10.7x is now default – Legacy -novopt option is no longer supported product:Mentor...
Mentor Graphics QuestaSim 2020.1 Mentor, a Siemens business, is pleased to announce the availability of QuestaSim 2020.1 comprehensive platform for verification complex designs. Questa is built on a core simulation and debug engine providing the industry’s most complete native support of Verilog, SystemVerilog, VHDL, SystemC, PSL and UPF. Release Notes for QuestaSim 2020.1 – Date: Jan 28 2020 New Features Contained in this Release: – Improved SystemVerilog performance, syntax support, extensions – Improved VHDL performance defaults – SystemC 2.3.2 support and default – Visualizer Debug high performance and capacity (VIS) – Coverage – adaptive exclusions, multibit expressions, FSM, toggle improved – Coverage – new reporting switch from 10.7x is now default – Legacy -novopt option is no longer supported product:Mentor...
Altair PollEx 2020 Design and engineering require a system-level view of products and systems. The integrated design of mechanical behavior and electronics is a trademark of today’s product development. Based on a strong foundation of mechanical simulation software, Altair has expanded into areas of systems simulation and electromagnetics. Altair’s Pollex PCB solvers and verification tools extend these capabilities into a new domain, allowing Altair to provide software for system-level design decisions. Altair PollEx is the most comprehensive and integrated set of PCB design viewing, analysis and verification tools in the market for electrical, electronics and manufacturing engineers. PollEx is an open solution, which transfers data flawlessly between different ECAD and simulation environments. While PCB design tools are traditionally reserved for...
SolidWorks 2020 SP4.0 Service Pack 4.0 3D ContentCentral The 3D ContentCentral content is removed from the Design Library. Product:SolidWorks 2020 SP4.0 Lanaguage:Multi Language Platform:Win7/WIN10 Size:2DVD
CAMWorks 2020 SP3 for Solidworks 2019-2020 Processing is carried out directly in the SolidWorks environment and directly on the SolidWorks model. The results of the programmer are stored in the same model part or assembly SolidWorks. This ensures complete associativity of the model and tool paths, which leads to automatic updating of all tool paths when making changes to the model. When adding any technological data to the SolidWorks model, such as roughness designations, bases, shape tolerances and surface locations, dimensional tolerances, the programmer always has direct access to them, which makes it easy to select the part based on the machine and select ensuring the specified quality of the tool part and cutting conditions. The part can be...
CATIA.DELMIA.ENOVIA V5-6R2019 DELMIA, powered by the 3DEXPERIENCE platform, helps industries and service providers connect the virtual and real worlds of value networks to collaborate, model, optimise and perform. Operational excellence requires harmony across the value network. DELMIA provides solutions to leverage the virtual world of modelling and simulation with the real world of operations to provide a complete solution to value network stakeholders: From suppliers to manufacturers, to logistics and transportation providers, to service operators and workforces. DELMIA Disciplines & Solutions DELMIA for Automotive and Transportation DELMIA for Aerospace and Defence DELMIA for Construction DELMIA for Industrial Equipment Product:CATIA.DELMIA.ENOVIA V5-6R2019 Lanaguage:english Platform:Win7/WIN10 Size:1CD
Dassault Systemes DraftSight Enterprise Plus 2020 SP2.1 DraftSight 2020 is a feature-rich 2D and 3D CAD solution for architects, engineers and construction service providers, as well as professional CAD users, designers, educators and hobbyists.More options, choices and tools to suit your specific needs and preferences. Real design freedom is letting you work the way you want to work.Product:Dassault Systemes DraftSight Enterprise Plus 2020 SP2.1 Lanaguage:english Platform:Win7/WIN10 Size:1CD