Latest release Page 21
Cadence XCELIUM Main 25.09.003 Cadence XCELIUM Main 25.09.003: High-Performance Functional Verification Platform XCELIUM Main 25.09.003 is the latest release of Cadence's high-performance simulation and functional verification platform for complex SoC designs. It delivers multi-core simulation acceleration, advanced debug capabilities, and power-aware verification for digital, analog, and mixed-signal designs . Key Features XCELIUM Main Simulator Multi-Core Simulation: Advanced parallel simulation engine with up to 10x faster simulation performance for large-scale SoCs ML-Based Debug: AI-powered root-cause analysis to reduce debug time Multi-Language Support: VHDL, Verilog, SystemVerilog, e, SystemC, C/C++, UVM Power-Aware Simulation: UPF-based low-power verification with dynamic power switching XCELIUM Enterprise Simulation Enterprise-Level Capacity: Supports designs exceeding 10 billion gates; scalable across thousands of simulation cores Accelerated VIP: Native support for industry-standard...
AutoTURN v2025 AutoTURN 2025: Vehicle Swept Path Analysis Software AutoTURN 2025 is the latest version of Transoft Solutions' industry-leading swept path analysis and turning simulation software for transportation design professionals. It is available as desktop versions (AutoTURN, AutoTURN Pro) integrated with CAD platforms, and as AutoTURN Online for web-based simulations . Key New Features in 2025 Rear-Steered Vehicle Support Rear-Steered Vehicles: Simulate specialty vehicles with rear-steering or front-and-rear-steering configurations used in logistics, construction, and event planning Expanded Use Cases: Enables accurate swept path analysis for complex or temporary site layouts Enhanced Vehicle Selection Streamlined Filtering: Faster vehicle selection with improved filtering tools to find the right vehicle for each scenario CAD-Free Workflow: Available in AutoTURN Online for early-stage design without...
WormLab 2024.1.1 WormLab 2024: Automated C. elegans Tracking & Analysis System WormLab 2024 is the latest release of MBF Bioscience's complete hardware and software system for imaging, tracking, and quantitative analysis of C. elegans (roundworm) behavior . Released in September 2024, this version introduces significant enhancements in multi-worm tracking, analysis capabilities, and workflow efficiency . Key New Features in 2024 Multi-Worm Tracking & Batch Processing Multi-Worm Support: Simultaneously tracks multiple unmarked worms at up to 200 fps for high-throughput studies Batch Processing: Add videos or saved project files directly to tracking queue; apply saved configurations to multiple videos Enhanced Video Navigation: Variable keyframe intervals for faster, smoother scrolling; user-configurable for short or long duration videos Behavioral Metrics & Analysis Product:WormLab...
Geochemist Workbench 18.0 GWB 18: Professional Geochemical Modeling Software GWB 18 (Release 18) is a major version of The Geochemist's Workbench®, the industry-standard software for geochemical modeling, aqueous chemistry, and reactive transport simulation. The current release as of July 2025 is 18.0.2, which represents the latest maintenance update to the GWB 18 series . This version introduces significant capabilities including gas phase evolution tracking, Pitzer database support, CD-MUSIC surface complexation models, and a next-generation spreadsheet interface (GSS) . Key New Features in GWB 18 Advanced Phase & Transport Modeling Product:Geochemist Workbench 18.0 Lanaguage:english Platform:Win7/WIN10 Size:1DVD
Trimble Business Center v2025.20 Trimble Business Center v2025.20: Comprehensive Survey & Geospatial Office Software Trimble Business Center (TBC) v2025.20 is the latest release of Trimble's industry-leading office software for surveying, reality capture, and geospatial professionals. Launched in November 2025, this feature-rich update celebrates 20 years of TBC and introduces highly requested capabilities including native target-based point cloud registration, expanded interoperability, and significant workflow enhancements across surveying, photogrammetry, and mobile mapping . Key New Features in v2025.20 Reality Capture & Point Clouds Product:Trimble Business Center v2025.20 Lanaguage:english Platform:Winxp/WIN7 Size:1DVD
Deswik Suite 2026.1 Deswik Suite 2026.1: Comprehensive Mine Planning Software Deswik Suite 2026.1 is the latest refresh of Deswik’s integrated mine planning platform. This version focuses on enhanced design agility, refined scheduling logic, and improved geological modeling tools tailored for modern underground and open pit operations. Key Features & Core Functionality Deswik.CAD (Design) Faster Boolean Operations: Solid modeling and triangulation adjustments are typically optimized for speed. Dynamic Design Tools: Enhanced handling of complex underground development drives and open pit ramps. Deswik.Sched (Scheduling) Gantt Logic Optimization: The scheduling engine often includes improvements for resource leveling and multi-pass scheduling. Scenario Planning: Enhanced support for “what-if” analysis to balance material movement and plant feed. Deswik.Gen (Geology) Implicit Modeling Upgrades: Version iterations typically refine...
Lidar360 v9.0 LiDAR360 v9.0: Advanced LiDAR Point Cloud & Remote Sensing Software LiDAR360 v9.0 is GreenValley International's major software release from August 2024, representing a comprehensive upgrade with over 150 new features. This version transforms the platform into a full-spectrum geospatial solution, integrating LiDAR point cloud processing with advanced spectral analysis and distributed computing capabilities. Note: As this is a major version upgrade (e.g., V8 → V9), users typically need to purchase an upgrade license. Key New Features in Version 9.0 New Spectral Analysis Module A completely new module for processing hyperspectral and multispectral data, directly integrated with point cloud workflows: 113 Spectral Indices: Comprehensive library for vegetation, water, soil, and urban material analysis Dimensionality Reduction: Principal Component Analysis (PCA)...
WorkNC 2026.1 WorkNC 2026.1: Smarter, Safer Mold & Die CAM Software WorkNC 2026.1 is the latest release of Hexagon's CAM software for high-precision mold, die, and tooling manufacturing, released in April 2026 . It introduces machine-aware automation, optimized 5-axis finishing, and cloud-based tool management. Key New Features in 2026.1 Multi-Directional Rest Roughing (Machine-Aware) Automated 3+2 roughing: System analyzes material removal directions, evaluates machine head accessibility, and generates safe rest-roughing toolpaths in a single operation Eliminates guesswork: Especially valuable for deep cavities; ensures every machining view is collision-free and feasible for your specific machine Interactive control: Users can review and control machining orientations while benefiting from fully optimized toolpaths 5-Axis Dynamic Contact Finishing Circle-segment tool optimization: Surface-driven flank machining approach for...
Openwind V2.0 2025 Openwind 2.0: Wind Farm Design & Optimization Software Openwind 2.0 is UL Solutions' industry-leading software for wind farm design, optimization, and energy yield assessment . This major release introduces advanced wake/blockage modeling, floating wind support, environmental compliance visualization, and seamless UL WindNavigator integration . Key New Features in Version 2.0 Advanced Wake & Blockage Modeling New Wake Models: ASM (Averaged Simulation Model) and MSC (Multiscale) for improved wake and blockage effect modeling Complex Terrain Accuracy: Better simulation of turbine interactions and energy losses in complex terrain Floating Wind & Substation Optimization Floating Turbine Support: Simulate floating turbines with taut mooring lines; mix fixed and floating foundations in same project Substation Optimization: Automatically place multiple capacity-limited substations using...
ANY-maze 7.65 ANY-maze 7.65: Behavioral Research Software ANY-maze 7.65 is a maintenance release of Stoelting Co.'s video tracking software for behavioral neuroscience research, widely used in Morris water maze, elevated plus maze, open field, and fear conditioning paradigms. Release Date: May 2020 Update Type: Maintenance (bug fixes + minor improvements) What’s New in 7.65 Bug Fixes Incorrect error reports: Fixed an issue that could trigger error report prompts when no error actually occurred Dashboard panel: Resolved a problem that could occur when a key used to score behaviors was deleted while listed on the dashboard Improvements Low disk space check: Added automated check before opening files Temporary files optimization: When enabled, ANY-maze now always uses temporary files for large experiments...