XTools Pro 4.0 – extension for ArcGIS new tool provided for more convenient and efficient work with metadata in ArcMap. In addition to editing and viewing, you can password protect your metadata or parts of it, create your own metadata templates and track data revision history in your metadata.Product:Xtools Pro 4.0 Lanaguage:English Platform:/WinNT/2000/XP Size:13MB
What\’s new in Quartus II design software version 9.1? Quartus® II software version 9.1 delivers the #1 performance and productivity for FPGA, CPLD, and HardCopy® ASIC designs. This new release supports Altera\’s new lowest cost, lowest power FPGA family—Cyclone® IV GX FPGAs with integrated 3.125-Gbps transceivers. The Cyclone IV GX FPGA family is targeted to high-volume, cost-sensitive applications, enabling you to meet increasing bandwidth requirements while lowering costs. Version 9.1 further extends Quartus II software\’s productivity advantage by delivering 20 percent overall compile time reduction over Quartus II software version 9.0, and maintains 2x to 3x faster compile times than the nearest competitor for high-density 65-nm and 40-nm designs. In addition, the new Rapid Recompile feature in version 9.1 reduces...
From shear walls to tilt-up, precast, and ICF walls, engineers worldwide use spWall (formerly pcaWall, PCA-Tilt, TILT) to optimize complicated wall design, reinforcing, and deflections. spWall, formerly pcaWall/PCA-Tilt/TILT, is for design and analysis of reinforced concrete walls, tilt-up walls, and precast architectural and load-bearing panels. It uses an advanced graphical interface that enables the user to easily generate complex wall models. The geometry of the wall (including any number of openings and stiffeners), the material properties, the loads (point, area, and line), and the support conditions are assigned graphically using the mouse. Also, springs (translational and rotational) can be graphically assigned at any node. The program is based on the finite element method and can take into account second-order effects....
From commercial building foundations to industrial mats and slabs on grade, engineers worldwide use spMats (formerly pcaMats, MATS) to optimize complicated foundations design, reinforcing and soil-structure interaction. spMats, formerly pcaMats/MATS, is for analysis and design of concrete foundation mats, combined footings, and slabs on grade. The slab is modeled as an assemblage of rectangular finite elements. The boundary conditions may be the underlying soil, nodal springs, piles, or translational and rotational nodal restraints. The model is analyzed under static loads that may consist of uniform (surface) and concentrated loads. The resulting deflections, soil pressure (or spring reactions), and bending moments are output. In addition, the program computes the required area of reinforcing steel in the slab. The program also performs...
Widely used for design of shear walls, bridge piers as well as typical framing elements in buildings, spColumn (formerly pcaColumn, PCACOL, IrrCOL) can investigate sections that are impossible to find on design charts or do by hand. spColumn, formerly pcaColumn/PCACOL/IrrCOL, is for the design and investigation of reinforced concrete sections subject to axial and flexural loads. The section can be rectangular, round or irregular, with any reinforcement layout or pattern. Slenderness effects can be considered. The program offers investigation of irregularly shaped, reinforced concrete column sections that may contain openings or boundary elements. You can obtain the P-M interaction diagrams from both uniaxial and biaxial runs, as well as the Mx-My moment contour plots from biaxial runs for even the...
Newly upgraded to ACI 318-08 and renamed from pcaBeam, spBeam v3.00 is highly efficient and widely used for analysis, design and investigation of beams and one-way slabs in reinforced concrete floor systems. As a limited edition of spSlab, spBeam features torsion effects in the shear design and investigation allowing engineers to achieve more economical cross sections where coupled shear and torsion occur (in accordance with US and Canadian codes). Save more in both material and labor with the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these areas. spBeam performs a complete design for flexure and shear and the outputs the resulting reinforcement schedules (including bar numbers, sizes, lengths, and...
Newly upgraded to ACI 318-08 and renamed from pcaSlab and ADOSS, spSlab v3.00 is highly efficient and widely used for analysis, design and investigation of reinforced concrete floor systems. Save in both material and labor using the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these areas. spSlab analyzes beams, one-way slab systems (including standard and wide module joist systems), and two-way slab systems (including waffle and slab bands). With capacity to integrate up to 20 spans and two cantilevers of multiple floor system types in each model, the capabilities of spSlab are not limited to new designs. spSlab can perform strength investigation for evaluation and/or modifications of existing building...
The PROKON suite of structural analysis and design software is developed by engineers for engineers. Used worldwide in more than eighty countries, the suite provides quick and reliable answers to everyday structural and geotechnical engineering problems:-Frame and finite element analysis.-Steel member and connection design.-Reinforced and prestressed concrete design.-Reinforced concrete detailing.-Timber member design.-Masonry design.-Geotechnical analysis.-And various other useful applications Supported steel design codes:-AISC – 1989 ASD.-AISC – 1993 LRFD.-AS 4100 – 1998.-BS5950 – 1990.-BS5950 – 2000.-CSA-S16.1 – M94.-Eurocode 3 – 1992.-GBL 17 – 1988.-IS800 – 1984.-SABS0162 – 1984 (allowable stress design).-SABS0162 – 1993 (limit state design). Supported concrete design codes:-ACI 318-95.-BS 8110 – 1985.-BS 8110 – 1997.-CP 65 – 1999.-CSA-A23.3-94.-Eurocode 2 – 1992.-IS:456 – 2000.-AS 3600 – 2001.-HK Concrete – 2004.-SABS...
Encom is proud to release ModelVision Pro 9.0, which continues the tradition in software releases of presenting innovative modelling techniques for magnetics and gravity data. This exciting release of the industry standard in potential feld modelling software allows the extraction and utilisation of more information from new generation instrumentation and effcient semi-automation of target and regional area modelling. New FeaturesAt a glanceJoint InversionModelVision is now capable of inverting on multiple sensor channels from modern instruments including cross-wing gradiometers full tensor gravity and magnetic gradiometers, and multi-component fuxgate arrays. Joint inversion supports the elliptical pipe, tabular body and circular pipe.New Circular Pipe BodyA new body type has been introduced which contains two less parameters than the elliptical pipe.Data Wizard Drawing a...
PetrisWINDS Recall Overview PetrisWINDS Recall is the industry-leading solution for handling, storing and processing well bore data. It is established as an industry standard database with many clients adopting Recall at a corporate level. The design of PetrisWINDS Recall is the result of the integration of geological, geophysical and petrophysical data in a geoscientific environment and its scope extends well beyond the simple wire-line well log data. The system provides comprehensive history tracking, identifying work flow, and maintenance of key environmental information. One key feature of PetrisWINDS Recall is its tight coupling with a number of applications and utilities; click the link above for PetrisWINDS Recall G&G Applications to learn more about these industry-leading applications and utilities for the processing,...