Professional Software Archive

FORGAS Reliable Integrated Gas and Oil Field PlanningFORGAS has proven to be a reliable and efficient solution to model some of the largest gas fields in the world. It is used to evaluate compression options, to determine drilling schedules, to quantify backout or field constraints, to evaluate gathering system modifications, and to investigate infilldrilling and competitive drainage options. Model, Optimize, Forecast Field Development Scheduling Reservoir to Sales Line Flow Assurance Acid Gas Disposal Gas Storage Hydrates Production Optimization CO2 Sequestration FORGAS allows the seamless modelling of reservoirs, wellbores, pipelines, and facilities in one interface for field forecasting and development scheduling. Combining the best in multiphase flow and PVT behaviour technology, FORGAS resolves simple and, more importantly, large and complex networks...

Surface Line Facility A Surface Line facility has been added to WELLFLO. The Surface Line facility will allow the users to add a Surface Line of up to 1 mile at the Wellhead.  This Surface Line facility allows for elevation, diameter and roughness changes.  However, it only supports a user specified fluid temperature profile for the Surface Line regardless of whether temperature calculations are done for the well.  The Surface Line facility can be added to the Wellhead Facilities under the following conditions: 1. The Well Direction is set to Production. 2. The Parametric option is NOT enabled. 3. The case does NOT have a Surface Line already added.  Only one Surface Line is allowed to be added per case.  The Surface Line facility has three tabs, a Profile, a Dimensions and a Stream Tab.          On the Profile tab, the user can specify the label for the Surface Line, the Elevation Profile (in terms of Distance and Elevation), and the Fluid Temperature at each elevation point.   On the Dimensions tab, the user can enter Diameter and Roughness information, including any changes along the length of the elevation profile.   Page 4of 6WELLFLO 8.3 Release Notes          On the Stream tab, the user can specify the pressure at the downstream end of the Surface Line, as long as the pressure is not already specified at the wellhead or bottomhole.   This new feature offers users the flexibility to create much more accurate models of their wells; including the interaction of the well with near wellhead surface piping. WELLFLO – Drillbench Data Sharing WELLFLO now was the capability to share well geometry information with Drillbench using the “Import From Drillbench” and “Export to Drillbench” functions found in the File Menu.  Page 5of 6WELLFLO 8.3 Release Notes The geometry information that is currently shared includes: 1) Drilling Profile information including: a. Vertical profile b. 2D profile c. 2D (KOP) profile d. 2D (TVD vs MD) profile e. 3D (XYZ) profile f. 3D (Min Curvature) profile. 2) Production Casing geometry. 3) External Casing geometry. 4) Tubing geometry.  When the user chooses to export data from WELLFLO to Drillbench, the standard “Save” dialog will appear.  The user can then select to either save the WELLFLO geometry information to an existing Drillbench (DML) file, or store it to a new file.  If saving to an existing DML file, only the drilling profile and tubular geometry information will be overwritten.  After the user has selected the DML file to export to, WELLFLO will export the geometry information, and then provide a status message. Similarly, when the user chooses to Import data from Drillbench into WELLFLO, the standard Open File Dialog will appear.  The user can Select the Drillbench file to import from, and WELLFLO will load the Drilling Profile and well geometry data.  If WELLFLO detects an overlap or disconnect between drill string sections or casing sections that is not supported by the software, the user will see an error message. It is expected that this import/export process will allow a much more streamlined workflow for clients who are using both WELLFLO and Drillbench for the simulation of their steady‐state and dynamic drilling operations.  Future releases of WELLFLO will include extensions of this feature to include other types of data used in the flow modelling of drilling operations. FlexLM‐based Licensing OptionProduct:neotec wellflo v8.30 Lanaguage:english Platform:WIN32&WIN64 Size:1CD

ASAP is the time-proven standard in optical software, offering unmatched capability, flexibility, speed, and accuracy. ASAP will accurately predict the real-world performance of virtually any optical system: Automotive Lighting Bio-Optic Systems Displays/Colorimetry Imaging Systems Wave OpticsDesign and analyze imaging and illumination systems with CAD interoperability ASAP® is powered by the ASAP non-sequential ray-tracing engine — known throughout the optics industry for its accuracy and efficiency. Rays can encounter surfaces in any order and any number of times, with automatic ray splitting. Optimized for speed, ASAP will trace millions of rays in minutes. Use ASAP to model complex imaging systems, illumination systems, and light-concentrating devices. Create highly accurate source models using source images, point sources, ray grids, and fans. Model incandescent...

What\’s New in Zemax 13 LightningTrace™ Design lighting systems in a fraction of the time with real-time modeling of illumination systems. LightningTrace, a patent-pending technology, is a new paradigm in light system design, at 20-500x faster than conventional luminaire prototyping tools and ray tracing. Built specifically for light fixture design, it works with the Visual Optimizer to let you see illumination patterns change in real time as the system is modified! CAD Manager Reads native part and assembly files directly in the Zemax 13 IE environment, eliminating export, import and file translation errors. The ability to dynamically modify files from Creo® Parametric® (Pro/E) is new in Zemax 13 IE, adding to the existing, highly-successful links with SolidWorks and Autodesk® Inventor®...

Lumerical’s 2013b Release a Milestone in Modeling Sophisticated Photonic Components and CircuitsLumerical’s 2013b release contains targeted feature development to better address a wide array of sophisticated passive, nonlinear and active photonic components on their own and assembled within highly functional and complex photonic integrated circuits May 23, 2013 – Vancouver, BC – Lumerical Solutions, Inc., a global provider of photonic design software, announced today its 2013b release which provides significant improvements to all of Lumerical’s products, and includes releases of FDTD Solutions 8.6, MODE Solutions 6.5, INTERCONNECT 3.0 and DEVICE 3.0. This 2013b release will reinforce Lumerical’s status as the most frequently referenced vendor of dedicated photonic design tools by R&D professionals. Release Highlights: Passive and Active Photonic Component Design...

Visual MODFLOW® Flex is the industry standard software for 3D groundwater flow, heat and contaminant transport modeling.Integrated Conceptual and Numerical Groundwater ModelingPowerful 2D and 3D Visualization CapabilitiesIntuitive and Easy-to-UseA Complete Groundwater Modeling SystemWith Visual MODFLOW Flex you have a complete set of tools necessary for addressing water quality, groundwater supply, and source water protection initiatives, including:MODFLOW-2000, 2005, NWT – The world standard for groundwater flow modelingMODGLOW-LGR – Shared-node local grid refinement (LGR) for regional-local scale simulationsSEAWAT v.4 – 3D variable density groundwater flow coupled with multi-species solute and heat transportMT3DMS – The standard package for multi-species contaminant transport simulationsMODPATH – The standard package for forward and reverse particle trackingZone Budget – A package for sub-regional water budget calculationsPHT3D – A...

SolidCAM\’s powerful Simultaneous 5x MachiningBenefit from the most tested and proven 5-axis CNC milling toolpaths in the indutsry with the most advanced control over all aspects of toolpath and collision checking.Get instant feedback with Real time CNC Machine Simulation for checking the toolpath while it is being created – you don’t have to wait until you are finished programming to run a simulation and find an error.SolidCAM 5-Axis machining support all 5-Axis machine tools including Table/Table, Table/Head and Head/Head gantry machines and the latest Mill/Turn machining centres.Download the free 30-day trial of the full SolidCAM CAM software, including iMachining, to test for yourself the full power of SolidCAM Sim 5-Axis Milling!MORE INFORMATION ON THE FEATURES Proven Sim 5-Axis StrategiesA wide...

Function and featuresline Time series change of rise and fall of flood water surface Xpswmm plug-in(free license version) required the user to set a movable model for the position of the flood waters. This caused a lot of work when there was a large water surface. The new plug-in automatically expresses the rise and fall of flood waters and reduces the time consuming process. Time series change of water flow vector The plug-in can show the time series expression of the flood water vector and direction. It allows the reproduction of the flow visually. Expression of conduits and time series change of water level inside conduits You can see the 3D VR expression of the drainage network. It can display...

GibbsCAM 2013 is a robust and powerful release providing new system enhancements for improved functionality, quality, reliability and performance. Product enhancements are provided throughout the entire package, delivering ongoing value to existing Maintenance customers as well as new users. In addition, GibbsCAM 2013 offers new specialized options for turbomachinery and porting applications.RODUCTION MILL Mill Feature: Assign certain machining attributes directly to part features for faster process and part creation and changeability Mill Feature VideoContour: New options include Ramp Down, Extra Offsets, User Plunge, and Back and Forth Contour VideoPocketing: New options include Outermost Shape As Boss and Bottom-up Hit Flats (plug-in) Pocketing VideoDrilling and Thread Milling PatternsRadial Sorting of 4-axis and 5-axis Holes Radial Sorting VideoSurface Flow SOLIDSURFACER Surface Flow:...

AutoReaGas, which is owned jointly by Century Dynamics and TNO of The Netherlands, is a specially developed 3D CFD based software for modeling gas explosions and subsequent blast effects. It is particularly designed for scenarios where there is significant congestion (pipework and equipment) and confinement (from structures, including vents) which have significant effects on the flame acceleration and thus the resultant overpressures. AutoReaGasAutoReaGas is widely used worldwide by many consultants, contractors, operators and researchers involved in safety and risk analysis of both offshore (including platforms, FPSOs) and onshore (chemical and power plants, mining and transportation) facilities. Importantly, AutoReaGas has been validated including during the well known BFETS tests where blind predictions were most favorably compared with test results. Where there...