Structure Page 147

Water Hammer and Transient Analysis Software HAMMER is the only transient analysis and water hammer modeling product to run from within MicroStation, AutoCAD, and ArcGIS, or as a stand-alone application. Water utilities, municipalities, and engineering firms around the world trust HAMMER to efficiently identify, manage, and mitigate the risks associated with transients. Trust HAMMER\’s computationally rigorous hydraulic engine and easy-to-use interface to efficiently identify, manage, and mitigate water surge risks. With HAMMER, you can: Develop cost-effective surge control strategies Prevent costly infrastructure damage Trim construction, operation, and maintenance budgets Model any surge protection device Minimize wear and tear on pipes Simulate any transient condition Ensure the longevity of your water system Prepare for power failures and minimize service interruptions HAMMER...

spSlab analyzes beams, one-way slab systems (including standard and wide module joist systems), and two-way slab systems (including waffle and slab bands). With capacity to integrate up to 20 spans and two cantilevers of multiple floor system types in each model, the capabilities of spSlab are not limited to new designs. spSlab can perform strength investigation for evaluation and/or modifications of existing building slabs. This program is sure to save engineers time crosschecking designs with applicable design code provisions. Save in both material and labor using the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these areas. spSlab also incorporates torsion into shear design and investigation of beam systems. Shear...

The following Enhancements have been implemented for CSiBridge 2015 v17.0.0: – The responsiveness of the user interface has been improved.– The DirectX graphics functionality has been enhanced.– A friction-spring hysteretic damper has been implemented as a new link property. The force-displacement relationship exhibits linear slipping stiffness when loading, but unloads with a smaller slipping stiffness. A pre-compression displacement and a displacement stop-limit may be specified.– A bilinear Maxwell damper has been implemented as a new link property. This device is a linear spring in series with a dashpot whose force-velocity relationship exhibits bilinear viscous behavior, typical of certain oil dampers having a relief valve.– Improved convergence behavior and increased speed for nonlinear static and direct-integration time-history analysis.– Increased speed of...

S-FOUNDATION is a complete analysis, design and detailing solution for both complex and simple foundation configurations. Using interactive pick and drop tools, the engineer can quickly define footings, mat and pile foundation configurations while S-FOUNDATION automatically generates and manages the underlying FEA model. S-FOUNDATION runs as a stand-alone solution, but also includes two-way automated S-FRAME Analysis linksAutomated Interactive pick and drop tools allow you to quickly define the foundation configuration while S-FOUNDATION automatically generates and manages the underlying FEA model using proven S-FRAME Software meshing and solver technology. Integrated Runs as a complete stand-alone analysis and design foundation application, but also includes optional two-way S-FRAME Analysis links that automatically apply foundation loading conditions and afterwards, integrates the optimized foundation model...

SAP2000 is general-purpose civil-engineering software ideal for the analysis and design of any type of structural system. Basic and advanced systems, ranging from 2D to 3D, of simple geometry to complex, may be modeled, analyzed, designed, and optimized using a practical and intuitive object-based modeling environment that simplifies and streamlines the engineering process. The SAPFire ® Analysis Engine integral to SAP2000 drives a sophisticated finite-element analysis procedure. An additional suite of advanced analysis features are available to users engaging state-of-the-art practice with nonlinear and dynamic consideration. Created by engineers for effective engineering, SAP2000 is the ideal software tool for users of any experience level, designing any structural system. Integrated modeling templates, code-based loading assignments, advanced analysis options, design-optimization procedures, and...

Advance Design 2015 is fully part of the Graitec Advance suite composed by Advance CAD 2015 and Graitec BIM Connect 2015 (making possible files exchange and synchronization with Autodesk Revit ?.GRAITEC Advance is linked also with Autodesk Advance Steel 2015 ?and Autodesk Advance Concrete 2015 ?in order to offer a Building Information Modeling (BIM) system that automates the entire structural design and construction documentation process from engineering design and structural analysis to member optimization, detailing and fabrication.Advance Design 2015 is articulated around 3 main subjects:刋New options for the reinforced concrete design according EC2.刋A new starting screen for easier use and access.刋The implementation of the new NTC2008 Italian codes.This release 2015 comes also with several small improvements and adjustments which are...

SACS is an integrated suite of software that supports the analysis, design, fabrication, and installation of offshore structures, including oil, gas, and wind farm platforms and topsides. Its ability to dynamically iterate designs allows users to perform advanced analysis, comply with offshore design criteria, and visualize complex results. SACS provides offshore engineers with comprehensive analysis and design capabilities that improve infrastructure operational safety and minimize risk and ensure compliance for a broad range of structures. It is proficient in specialized analyses important to any offshore project, including: non-linear structural analysis; dynamic response analysis due to wind, current, waves, and seismic loads; analysis for impact effects; and special high-end analysis for severe accidental loadings such as dynamic blast, ship impact, and...

3D Rail Infrastructure Design and Maintenance Software Bentley Rail Track is a comprehensive 3D rail design software application for preliminary and detailed 3D design of rail infrastructure. Comprising of regression analysis, horizontal, vertical alignment and cant design, turnout placement to international standards, and rail corridor modelling, the software offers high degrees of automation to established industry workflows, delivering significant productivity improvements and time savings for design and maintenance of all types of rail projects including metro and light rail, commuter, and highspeed rail.Product:Bentley Rail Track V8i 08.11.07.615 Lanaguage:english Platform:Win7/WIN8 Size:1CD

AutoPLANT i-model Composer V8i A new version of AutoPLANT i-model Composer V8i (SELECTseries 3) is now available. This updated version contains both fixes for issues discovered in the original (SELECTseries 3) release (build 08.11.08.18) along with enhancements and new features. The enhancements and new features include: · Choice of schema based on i-model purpose (AutoPLANT schema or OpenPlant schema) · The ability to assign security certificates · The ability to choose whether or not to include fasteners in the i-model · The ability to generate the i-model data from the model or the project database Please consult the accompanying ReadMe for more information.Product:AutoPLANT i-model Composer V8i 08.11.09.14en Lanaguage:english Platform:Win7/WIN8 Size:1CD

ProjectWise is the only project collaboration and AECO information management software developed explicitly for the design and construction of architecture, engineering, construction, and operations (AECO) of infrastructure projects. Unlike traditional document management and collaboration software, ProjectWise is a system of collaboration servers and services for AECO information for the design and construction of infrastructure projects while the work is in progress. It provides scalable, industry-proven, advantages in work-sharing, content re-use, and dynamic feedback.Product:Bentley ProjectWise V8i Lanaguage:english Platform:Win7/WIN8 Size:2CD