CAE FEA Page 171

MAGMASOFT® simulation capabilities provide a better understanding of mold filling, solidification, mechanical properties, thermal stresses and distortions, and much more. Fully menu-driven with an integrated solid modeler, CASD interfaces, and extensive databases, MAGMASOFT® provides a complete solution for design, production, and quality departments. MAGMASOFT® provide insights in die casting for: Casting Quality Optimized gatingReduced air entrapmentFewer cold shutsReduced porosityOptimized shot profiles Productivity Reduced cycle timesOptimized thermal balancing of diesOptimized die spray Costs Fewer die modificationsImproved die life timeLess scrap Early determination of die casting machine size The MAGMASOFT® module magmahpdc simulates the die casting process based on comprehensive heat and fluid flow models and takes into account the process and boundary conditions in detail. Magmahpdc supports: Shot calculation A complete...

Marc and Mentat combine to deliver a complete solution (pre-processing, solution, and post-processing) for implicit nonlinear FEA. Marc provides the easiest to use and most robust capabilities for contact, large strain, and multiphysics analysis available today to solve static and quasi-static nonlinear problems. Finite element analysis (FEA) has become a critical part of the product development process, but most FEA programs are limited to solving within the limits of linear material properties and displacements, small strains, and small rotations. Many software providers claim to have nonlinear capabilities, but few are able to consistently and reliably solve problems involving changing contact conditions between components and/or large strain (plasticity or elastomeric behavior, for example). When the going gets tough, even some of...

* y5 Easy5Easy5 Controls and Systems Simulation Engineering aircraft, vehicles, agricultural equipment, and other complex systems requires a systems-engineering approach in which not only the components and subsystems but the entire system as a whole is tested. Traditional build and test methodologies are time-consuming and expensive; and now more than ever, every industry is challenged to meet the conflicting requirements of increasing innovation while reducing cost and time to market. Easy5 provides accurate, reliable multi-domain modeling and simulation of dynamic physical systems. Using Easy5, some of the most respected companies in the world are evaluating system level performance with CAE to reduce physical prototypes, cut cost, and accelerate their product development process. Dynamic systems, those systems whose behavior as a...

Corporation MSC.Software (Santa Ana, California, USA), since 1963 working in the field of computer technology engineering analysis, offers a wide range of integrated VPD-systems – computer technology engineering analysis and virtual simulation. Technology VPD are the highest, most modern, qualitatively new level of systems engineering analysis (CAE – Computer Aided Engineering) and are designed to improve the quality and reliability while dramatically reducing the timing of design and manufacturing, as well as significantly reducing the number of prototypes and field tests.MSC.Software The company delivers its programs and services to aerospace and automotive companies, electronics manufacturers, other industries, higher education institutions. A strong reputation is deserved MSC.Software successful cooperation with renowned companies such as BMW, DaimlerChrysler, Fiat, GM, Ford, Nissan, Toyota,...

Patran is the world’s most widely used pre/post-processing software for Finite Element Analysis (FEA), providing solid modeling, meshing, and analysis setup for MSC Nastran, Marc, Abaqus, LS-DYNA, ANSYS, and Pam-Crash. Designers, engineers, and CAE analysts tasked with creating and analyzing virtual prototypes are faced with a number of tedious, time-wasting tasks. These include CAD geometry translation, geometry cleanup, manual meshing processes, assembly connection definition, and editing of input decks to setup jobs for analysis by various solvers. Pre-processing is still widely considered the most time consuming aspect of CAE, consuming up to 60% of users’ time. Assembling results into reports that can be shared with colleagues and managers is also still a very labor intensive, tedious activity. Patran provides a...

MD Adams 2010 is a mechanical systems analysis software built on MSC’s multidiscipline (MD) CAE framework. MD Adams integrates mechanical components, pneumatics, hydraulics, electronics, and control systems technologies to enable engineers to build and test virtual prototypes that accurately account for the interactions between these subsystems. Product manufacturers often struggle to understand true system performance until very late in the design process. Mechanical, electrical, and other subsystems are validated against their specific requirements within the systems engineering process, but full-system testing and validation comes late, leading to rework and design changes that are riskier and more costly than those made early on. MD Adams improves engineering efficiency and reduces product development costs by enabling early system-level design validation. Engineers can...

工程仿真软件和服务的全球领先供应商MSC.Software今日宣布推出MD Adams 2010 64位新版本，用户可以即刻下载。该增强版本主要提高了建模和分析方面的性能，使用户能够进行机械系统中更广泛、更可行的多学科分析。 MSC.Adams和MD Adams是全球使用最为广泛、最受信赖的解决方案，占据了全球该CAE分析领域绝大部分的市场份额，并广泛应用于汽车、航天、国防、医学、风力能源、包 装货物等行业的工程系统动力学。在此优越基础上，MSC.Software在新版MD Adams中进一步实施了现代化的C++ 解算器，改进了存储利用，并增强了有限元分析(FEA)的集成。经证明，这些改进使得大模型的读取速度提高95%，并且在同类模型运行分析方面，CPU性 能提高53%。案例显示，利用FEA的弹性体解决实际多学科问题时，该新版本比老版本的速度提高了700%，令人惊叹。 MD Adams新版本的其他重要改进包括： · Adams/Car插件模块，可以用于卡车建模和分析 · Adams/Car工具，通过轮胎和绝缘体的测试数据容易地定义模型参数 · Embedded Simulink S-Function可以通过外部系统库(External System Library)控制模型 · 从动态工作点导出Adams模型，再导入Nastran FEA · 后处理自动化支持，提高用户效率 · 为弹性体接触的壳体元素提供支持 · 对圆柱体、椭球体和盒子进行本地接触探测 Product:MSC MD ADAMS 2010 Win64 Lanaguage:English Platform:/Win64 Size:424.92G

PVTsim 19.0 released Updates and Bug fixes from PVTsim 18 to 19 New Options/Models PVT simulation options extended with Equilibrium Contact experiment. Updates and Bug Fixes General Tested on Windows Server 2008 and Windows 7 and installation guide updated. CSP viscosity model improved for P > 1000 bar. No longer possible to import fld-type databases (format used until version 13). API correlation for interfacial tension between hydrocarbon and water replaced by Firoozabadi and Ramey (1988). 5 mercaptanes added to the pure component database Methyl-mercaptane Ethyl-mercaptane Methyl-ethyl-sulfide Di-Methyl -sulfide Di-Ethyl-sulfide Fluid Management When characterizing multiple fluids to the same pseudo-components (Viscosity Tuning and Same Pseudos options) a master fluid composition is saved in addition to the individual fluids. The master fluid...

This is the latest full release of the Oasys Suite (PRIMER, D3PLOT, T/HIS, REPORTER & SHELL). 9.4.1 is a bug fix version of 9.4 (there have been no new features added between 9.4 and 9.4.1). Enhancements (for 9.4) and bug fixes are detailed in the release notes below, and 9.4 new features are explained fully in the PDF documents below. The 9.4.1 software has been thoroughly tested through our QA procedures. Release notes detailing the changes from 9.3.1 to 9.4, and 9.4 to 9.4.1 can be found here. DOWNLOAD OASYS 9.4.1 The 9.4 software requires a new licensing file if updating from 9.3 or previous. A new licensing file is not required if updating from 9.4 to 9.4.1. For more...

Turbo Package Analyzer (TPA) provides the package extraction and automation capability needed to address the electrical requirements of today\’s complex high-performance SiP, chip-scale, flip-chip, ball-grid array, and wire-bond. With TPA, IC and package designers of analog/RF and high-speed digital applications are able to fully characterize an entire package structure and automatically extract lumped or distributed RLC values for use with Nexximproduct:Ansoft TPA 5.0 Lanaguage:english Platform:Winxp/Win7 Size:71MB