CAD CAM Page 302

2013 R1 is a release combining new strategies with an improved user interface across many aspects of the software. The strategies will make creating tool paths effortless and the improvements to the user interface will get your result much faster than before. Edgecam Wire Erosion Edgecam’s new Wire Erosion product is based on the industry leading Vero PEPS Wire product and offers an intuitive environment for the comprehensive programming of all Wire EDM machine tools. Including a comprehensive library of proven post-processors and knowledge-based cutting schemes as standard. Users can select from one of the pre-defined machining strategies such as \’Unattended night runs\’ and \’Attended day runs\’ or, alternatively, define their own. Features inlude : Pre-configured code generators, optionally configurable....

Press die design\” supports press die design. \”Press die design\” is roughly classified into three categories of capability, namely design support capability, modeling support capability, and post processing support capability. The post processing support capability is further divided into solid verification capability, drawing creation capability, order information related capability, and machining interaction capability. For an early stage of a design work, back face creation, sectional die creation, spring selection, and standard part placement are supported by the dedicated commands. For a final stage of a design work, automatic part list creation using the parts attributes and drawing checking using the interference check and press composition inspection command are supported. And, by utilizing the machining characteristics, CAM interaction is also possible.3次元モールド金型設計を強力に支援します。成立性検討から入れ子設計、詳細設計、図面作成、手配データ作成までといった金型設計のあらゆる場面でご使用いただけます。多くの導入実績、高い導入効果をあげており、導入後3～6ヶ月で30%を超える設計工数削減、設計ミスや手戻りの減少、設計品質の向上、部品手配の自動化、図面作成工数の削減、プレート加工の自動化、周辺プロセスへの3Dデータ活用といった効果が期待できます。機能概要初期検討機能...

OPEN MIND Technologies AG introduces the new version of its hyperMILL® CAM solution. Highlights of the 2012 version include automatic programming options for rectangular pockets, optimisations for 3D roughing and new strategies for 5axis machining of impellers and blisks. Other changes improve calculation times and programming times. The new \’adaptive pocket\’ machining mode allows for automatic programming of rectangular pockets. Within a machining job, classification occurs automatically in closed and open pockets and rectangular levels. According to the various accessibility conditions for the tool and relative sizes of the tool and pocket, hyperMILL® automatically selects the most suitable machining method: spiral, contour-parallel or peeling. The optimised clearing movements take place in long, straight paths with constant cutting conditions. Critical full...

New Features PowerSHAPE 2013 includes: Fast setting of vectors and axes in Direct Modelling Replace Face to simplify complex edits Improved selection tools Direct capture of scanned data PowerSHAPE 2013 Whats New Flyer Download a PDF HERE to find out more about the new features in PowerSHAPE 2013 and the benefits they bring to your design and modelling operations. PowerSHAPE 2013’s improved Direct Modelling tools are easier to use, more flexible, and even simpler to control. Dynamic feedback shows rotation axes, angles and distances, letting you make the manufacturing changes you need with a minimum of work. New selection tools make it easy to choose solid faces to modify. PowerSHAPE 2013 includes:Replace Face, to provide machining allowances or electrode clearances•improved...

GFXhome » Software » Software PC » DS 3DVIA Composer V6R2013x SP0 Build 6.11.1.2254 (x86/x64)uploaded.to Information of news11-12-2012, 15:26DS 3DVIA Composer V6R2013x SP0 Build 6.11.1.2254 (x86/x64) category: Software » Software PCDS 3DVIA Composer V6R2013x SP0 Build 6.11.1.2254 (x86/x64)DS 3DVIA Composer V6R2013x SP0 Build 6.11.1.2254 (x86/x64) | 1 GB 3DVIA Composer allows you to repurpose existing 3D design data to more rapidly create and update high quality product deliverables including documentation, technical illustrations, animations, and interactive 3D experiences. By leveraging the power of 3D, you can provide your customers, partners, and stakeholders with more clear, easily understandable product communications that significantly improve their ability to understand and retain complex information. 3DVIA Composer also helps product deliverables to be created earlier in...

These enhancements and updates have been tested and released by the Quality Control Department and will function inside Mastercam X6. Follow the instructions given in the \’info\’ button of each download for install instructions.Read Before Installing Mastercam X6 X6 has both a 32bit and a 64bit version so please read the notes below: The X6 32bit version can only be installed on a 32bit OS and the X6 64bit version can only be installed on a 64bit OS. X6 64-bit version will NOT allow saving to a previous X version. X6 32-bit can save files to previous version just as past versions allowed (geometry only). Files created in previous Mastercam versions can be read into both X6 32 and X6...

Adding Power and Simplicity Where You Want it! Version 7.2 includes several new features that make commonly-performed tasks simpler and therefore significantly faster. This release also contains many new performance enhancements and code optimizations, ensuring it will likely run faster and better on your existing hardware. New features include: Improved Multi-processor UtilizationRefine display is approximately 50% faster through increased utilization of multiple processors. Also, the display processing is performed in the background so VERICUT’s desktop continues to be active. Faster Gouge CheckingAn invisible design model can be used in AUTO-DIFF. This prevents the design model from getting in the way and making it difficult to visually identify some gouges. Also, Constant Gouge Check is now quickly configured via the Project...

209536 Draft feature is not highlighted in FeatureManager when selcted from graphics area346012 Need feature scope support for ModelDoc2::InsertCutSurface and SurfaceCutFeatureData464195 AddItemNotify not fired when a sketch is added519376 Opening part using a BOM opens last saved configuration instead of the one used in the drawing view521518 Adding board cut-outs using additional Board_Outline features does not work correctly, material is added rather than removed533223 Develop a tool to compare results from different flow runs easily556312 Crop and detail view of exploded state assembly does not display correctly (part of the assembly is cut) when displayed in shaded mode564852 Adding prefix to Pack and Go does not update linked equation reference568267 Delete view in view orientation window on drawing not possible569854...

Delcam launches the 2013 release of FeatureCAM feature-based CAM software. This will offer a new series of options for three-axis milling and enhancements in five-axis machining, plus improvements in the turning and mill-turn modules. FeatureCAM was the world’s first feature-based programming software when it was launched in 1995. Constant development since then has ensured that the system has retained its leadership in programming speed and ease of use, while an increased range of strategies has been added to provide more efficient toolpaths giving greater productivity on a wider range of machines. The main change to the 2013 FeatureCAM product family has been the introduction of three levels of 3D machining functionality. FeatureMILL 3D Lite offers single-surface machining with a basic...

Gibbs and Associates, developer of GibbsCAM® software for programming CNC machine tools and a Cimatron (NASDAQ: CIMT) company, announced today the release of the latest version of GibbsCAM CNC programming software. Called GibbsCAM 2012+, this new version includes tremendous speed and performance improvements, including a rendering option specifically geared for multi-axis parts, improved cutting strategies and many productivity enhancements. The new version includes improvements for all levels of GibbsCAM, including the Mill and Lathe Production, SolidSurfacer, Radial Milling, MTM and 5-Axis options. GibbsNews-Summer2012 GibbsCAM 2012Parts requiring simultaneous 5-axis toolpaths, suchas finishing the blades on this Blisk, can nowbe rendered more accurately using the newMulti-Axis Rendering option included inGibbsCAM 2012+. GibbsCAM 2012+ includes a Multi-Axis Rendering option free of charge with...