ASDIP.Structural.Retain.v3.7.1ASDIP Retain is a suite of modules specifically dedicated to the design of retaining walls, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.ASDIP Retain includes the design of the following two types of retaining walls: Cantilever Retaining Walls: Design of a retaining wall supported only at the base under the combination of earth pressure, surcharge, wind and seismic loads. The module designs the wall per the load combinations of the ASCE 7. Restrained Retaining Walls: Design of a retaining wall supported at the base and laterally restrained at the top, also known as a basement wall, under the combination of earth pressure, surcharge, wind and seismic loads. The...
ASDIP.Structural.Foundation3.v3.2.3ASDIP Foundation is a suite of modules specifically dedicated to the design of concrete footings, based on the latest IBC / ACI 318 specifications, that greatly simplifies the time-consuming calculations in any structural engineering office.ASDIP Foundation includes the design of the following types of concrete footings: Spread Footings: Design of a concrete spread footing under the action of vertical load, horizontal load and biaxial bending. This module designs the footing per the load combinations of the ASCE 7. Strap Footings: Design of a concrete strap footing under the action of vertical loads, horizontal loads and bending moments. This module designs the two footings and the strap beam per the load combinations of the ASCE 7. Combined Footings: Design of a...
MineSight 2017 12.0MS3D➢Auto Cut GenerationFixes reverse direction not generating cuts with parallel to edit grid option (MS3D–3731)➢AutoslicerStandardizes labeling for output digit padding (MS3D–14191, CRDB–6412, SCP–72190)Fixes inability to activate the create polygons from option (MS3D–14791, CRDB–6910)➢CADImproves CopyTo Object to work with unselected elements of any type (MS3D–13858)Fixes message window wording when using element move (MS3D–1079)➢Calculate Volume ToolFixes generating correct plane names when using surface volume with a grid set (MS3D–13985, CRDB–105, SCP–22386)➢Compute Angle Between PolylinesFixes compute angle between polylines to generate 2D polylines with 2D data when moving to geometry (MS3D–5702)Fixes to remember last dialog location (MS3D–10900)➢ContourImproves contour performance (MS3D–9889)Standardizes labeling for output digit padding (MS3D–14194, CRDB–6412, SCP–72190)➢DWG/DXFAdds a \”apply to all\” option to the message box query that asks to...
Zemax OpticStudio V17OpticStudio® provides the flexibility to choose the optical and illumination design features you need.LightingTrace™ Accelerate conventional non-sequential ray tracing by orders of magnitude. Modify system parameters with real-time results and quickly optimize and tolerance systems. Stock Lens Matching Search vendor catalogs for off-the-shelf optical components to replace custom components. This can save you considerable costs in the finished design by eliminating the need for custom manufacturing. Part Designer Design complex, custom CAD components to incorporate in a non-sequential optical system as fully parametric parts or to export to CAD formats. Contrast Optimization Optimize systems for MTF at least 30 times faster using the Contrast optimization – this innovative new feature uses the Moore-Elliott method by Zemax.Product:Zemax OpticStudio V17_Leading...
Antenna Magus 2017.3_ antenna design softwareMagus (Pty) Ltd. and CST – Computer Simulation Technology AG (CST) announce the release of Antenna Magus 2017, the latest version of the leading antenna design tool. The latest edition includes several new antennas and design updates. Antenna Magus includes over 300 antennas, and the Specification-based workflow introduced in 2016 allows users to find, design and export suitable antennas based on their requirements. The 2017 version introduces 13 new types. Four specialized horn antennas have been added – the smooth spline profiled pyramidal horn, the 4 waveguide-fed dual polarized pyramidal horn antenna, the waveguide-fed pyramidal array and the TEM horn with magnetic dipoles (or “Koshelev antenna”).Antenna Magus 2017 Professional There are also five antennas commonly...
Kappa workstation 5.12.03 KAPPA is the leading provider of Dynamic Data Analysis software, training and consulting services. Data are analysed on whatever scale is available, from high frequency, high resolution transient data through low frequency, low resolution rate data in production analysis and on into full field history matching and vertical description using production log and formation test analysis. Released in 2016, Generation 5 speeds workflows, connectivity and provides a powerful platform for the future and automation. KAPPA-Workstation is an integrated engineering suite which offers analysis and modeling tools for reservoir dynamic data. Our clients told us to ‘think open and think big…’ For this reason, Generation 5 is fully 64-bit, it uses parallel processing for today’s multicore processors and...
IAR Systems, a future-proof supplier of software tools and services for embedded development, announces the availability of a major update of its development tools for ARM. Version 8.10 of IAR Embedded Workbench for ARM provides complete support for the C11 and C++14 language standards. It also includes an updated integrated development environment (IDE), bringing boosted user experience and improved workflows to developers worldwide. IAR Embedded Workbench for ARM offers a complete IDE with everything a developer needs in one single view. The included IAR C/C++ Compiler provides leading technology built by the compiler experts at IAR Systems, and version 8.10 of the development tools add compliance with the latest C language standard ISO/IEC 9899:2011 as well as the latest C++...
Autodesk Structural Bridge Design 2018 Autodesk Inc., a world leader in 3D design software for entertainment, natural resources, manufacturing, engineering, construction, and civil infrastructure, has released Structural Bridge Design 2018. This release added post-tensioned concrete beam design to AASHTO LRFD 7th Edition and 3D interaction surfaces for design sections. What\’s new in this release: – Interaction Surface AnalysisThis release adds Interaction Surface Analysis for design sections which allows 3D interaction surfaces to be calculated for any reinforced concrete section. Each load case applied to the section is plotted, showing both permanent and variable loads. When a load case falls outside of the surface, the line changes color from black to red as shown in the plot below. Interaction surfaces can...
Leica MultiWorx 2.2.1 for AutoCAD Leica MultiWorx for AutoCAD is for point cloud processing newcomers using Leica Nova MS60 MultiStation\’s integrated laser scanning capability. This plug-in for AutoCAD and Civil 3D lets drafters and designers work with rich, 3D point clouds in a familiar CAD environment. It also provides simpler and more powerful tools for navigating point clouds and creating deliverables than native CAD capabilities. The tools you need to quickly get it rightLeica MultiWorx for AutoCAD makes it easy to create accurate deliverables. True colour images from Nova MS60, aligned to scans, provide powerful visual context. Intuitive orientation tools make working in 3D easy. Versatile clipping tools make subdividing scans into areas of interest fast and accurate. A robust...
ESAComp_4.6.040_Composites Analysis and DesignESAComp is software for analysis and design of composites. Its scope ranges from conceptual and preliminary design of layered composite structures to analyses of details. ESAComp is a stand-alone software tool, but thanks to its ability to interface with widely used finite element software packages, ESAComp fits seamlessly into the design process. The comprehensive material database of ESAComp forms the basis for design studies. ESAComp has a vast set of analysis capabilities for solid/sandwich laminates and for micromechanical analyses. It further includes analysis tools for structural elements: flat and curved panels, stiffened panels, beams and columns, bonded and mechanical joints. ESAComp is developed and supported by Componeering Inc., Finland.Product:ESAComp_4.6.040_Composites Analysis and Design Lanaguage:english Platform:Win7/WIN8 Size:1CD