GEODELFT MSEEP 7.4.2.1simulates two dimensional stationary groundwater flow in a cross section of layered soil structures or in one phreatic aquifer, composed of different material areas. In MSeep version 7.4 a new model has been implemented to determine Piping and Heave. It will be released in the beginning of 2005. A beta-version is already available.Product:GEODELFT MSEEP 7.4.2.1 Lanaguage:English Platform:/WinNT/2000/XP Size:10MB
GEODELFT MWell 3.1.2.1 is a quick tool for drainage problems. Drainage is performed in well permeable soils called aquifers. Aquifers are separated by less permeable layers named aquitards. The drainage has direct effects on the aquifer in which it is situated. But also indirectly other aquifers are influences by leakage through the intermittent aquitards. In order to determine the flow characteristics a three dimensional transient calculation is required. The applied analytical modelling technique an elegant, fast and powerful method to obtain a quick and cheap overall picture of the flow changes in an area, where details are less dominant. With the goal in mind to use a quick and inexpensive tool for drainage problems MWell has been developed.Product:GEODELFT MWell 3.1.2.1...
GEODELFT MFoundation 6.3.1.3 can design and verification of bearing/tension piles and shallow foundations. Product:GEODELFT MFoundation 6.3.1.3 Lanaguage:English Platform:/WinNT/2000/XP Size:28KB
GEODELFT MDrill 5.1.5.1 enables the fast design of a pipeline configuration installed by the Horizontal Directional Drilling technique (HDD). In HDD three installation stages are considered: Pilot drilling Reaming the initial pilot borehole Pulling back the pipeline The initial borehole is called a pilot hole. The diameter of the pilot hole is enlarged using a reamer. Depending on the required final borehole diameter, the borehole can be enlarged in several steps using reamers of increasing diameters. Finally, the pipeline is pulled into the borehole. Product:GEODELFT MDrill 5.1.5.1 Lanaguage:English Platform:/WinNT/2000/XP Size:18MB
GEODELFT MPILE 4.2.3.1 enables the analysis of the three-dimensional behavior of single piles and pile groups, interacting via the pile cap and the soil, as a function of loading. MPile offers for this purpose a unique combination of the internationally accepted design rules of the API (American Petroleum Institute) and special soil interaction models all within the same graphical user interface. One of the great benefits of MPile is that switching between different computational models is very easy since all relevant input data of the previously used model is kept. This flexibility gives the users the opportunity to choose between a fast and simple calculation and a more complex but more accurate calculation, in a way that best suits their...
GEODELFT MSHEET 7.9.2.1 is a tool used to design retaining walls and horizontally loaded piles. MSheet’s graphical interactive interface requires just a short training period, allowing the user to focus their skills directly on the input of sound geotechnical data and the subsequent design of the wall or single pile. Product:GEODELFT MSHEET 7.9.2.1 Lanaguage:English Platform:/WinNT/2000/XP Size:22MB
New Release CivilFEM12 – Enhancements -Utility to postprocess solid element models as shell elements models (Solid to Shell). -Seismic response spectra can be defined by points. -Different seismic response spectra can be defined for different damping values. -Offsets in shell elements. -Conection with Autodesk Revit. -Algebraic combinations: calculation of all possible load states. -Interaction diagrams can be exported to data files (ASCII/HTML). -Posibility to have results files (RCV) larger than 8Gb size. -Generation of bridges with box section using shell elements (Bridges and civil non linearities Module). -Tendons may be defined independently from a support beam (Prestressed Concrete Module). -Prestressing on shell elements models (Prestressed Concrete Module). -Cam-Clay (Geotechnical and Foundations Module). -Tunnels wizard (Geotechnical and Foundations Module). -Retaining walls...
ANSYS CivilFEM 12 Win64 New Release! The most advanced, comprehensive and reputable finite element analysis and design software package available for the Structural Engineering Projects – ANSYS and CivilFEM bundled product. The system combines the state-of-the art general purpose structural analysis features of ANSYS (ISO-9001) with high-end specific civil engineering-specific structural analysis capabilities of CivilFEM, making it a unique and powerful tool for a wide range of civil engineering projects (such as powerplants, bridges, tunnels, singular buildings, offshore structures, etc As both programs are completely integrated, CivilFEM supports all types of advanced analysis supported by ANSYS (dynamic, static, linear and non-linear) running as a unique software and executable. CivilFEM has a modular design composed by a general product called CivilFEM...
Mentor Graphics SystemVision 5.4 is Mentor Graphics breakthrough System Modeling solution that allows system engineers and engineers from multiple disciplines to communicate, simulate, and optimize designs for first-pass success. SystemVision provides a virtual lab for design and analysis of analog, mixed signal, digital, and electro-mechanical designs. With SystemVision you can explore concepts, specify system functionality, investigate architectural partitions, and integrate implementation of electronics, sensors/actuators, controls, and embedded software, all in one virtual environment. The result is reduced development time, simplified HW/SW integration, and reduced manufacturing and warranty costs with SystemVision. Provides a virtual lab for creating and analyzing analog, digital, and mixed-signal systems Supports industry-standard languages: VHDL-AMS, SPICE, and C Allows design verification of hierarchical schematic and circuit elements...
Autodesk today announced that it has reached a key milestone in its integration of recently acquired Algor software with the release of the Autodesk Algor Simulation 2010 products. A key component of the Autodesk solution for Digital Prototyping, Autodesk Algor Simulation software provides a broad range of mechanical simulation tools to help designers and engineers make critical decisions earlier in the design process. Extensive finite element modeling tools and built-in material libraries within Autodesk Algor Simulation software allow users to study initial design intent and accurately simulate the behavior of a digital prototype. Additionally, Autodesk Algor Simulation software supports direct, associative data exchange with most CAD software tools, so users can easily collaborate and make iterative design changes without having...