From shear walls to tilt-up, precast, and ICF walls, engineers worldwide use spWall (formerly pcaWall, PCA-Tilt, TILT) to optimize complicated wall design, reinforcing, and deflections. spWall, formerly pcaWall/PCA-Tilt/TILT, is for design and analysis of reinforced concrete walls, tilt-up walls, and precast architectural and load-bearing panels. It uses an advanced graphical interface that enables the user to easily generate complex wall models. The geometry of the wall (including any number of openings and stiffeners), the material properties, the loads (point, area, and line), and the support conditions are assigned graphically using the mouse. Also, springs (translational and rotational) can be graphically assigned at any node. The program is based on the finite element method and can take into account second-order effects....
From commercial building foundations to industrial mats and slabs on grade, engineers worldwide use spMats (formerly pcaMats, MATS) to optimize complicated foundations design, reinforcing and soil-structure interaction. spMats, formerly pcaMats/MATS, is for analysis and design of concrete foundation mats, combined footings, and slabs on grade. The slab is modeled as an assemblage of rectangular finite elements. The boundary conditions may be the underlying soil, nodal springs, piles, or translational and rotational nodal restraints. The model is analyzed under static loads that may consist of uniform (surface) and concentrated loads. The resulting deflections, soil pressure (or spring reactions), and bending moments are output. In addition, the program computes the required area of reinforcing steel in the slab. The program also performs...
Widely used for design of shear walls, bridge piers as well as typical framing elements in buildings, spColumn (formerly pcaColumn, PCACOL, IrrCOL) can investigate sections that are impossible to find on design charts or do by hand. spColumn, formerly pcaColumn/PCACOL/IrrCOL, is for the design and investigation of reinforced concrete sections subject to axial and flexural loads. The section can be rectangular, round or irregular, with any reinforcement layout or pattern. Slenderness effects can be considered. The program offers investigation of irregularly shaped, reinforced concrete column sections that may contain openings or boundary elements. You can obtain the P-M interaction diagrams from both uniaxial and biaxial runs, as well as the Mx-My moment contour plots from biaxial runs for even the...
Newly upgraded to ACI 318-08 and renamed from pcaBeam, spBeam v3.00 is highly efficient and widely used for analysis, design and investigation of beams and one-way slabs in reinforced concrete floor systems. As a limited edition of spSlab, spBeam features torsion effects in the shear design and investigation allowing engineers to achieve more economical cross sections where coupled shear and torsion occur (in accordance with US and Canadian codes). Save more in both material and labor with the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these areas. spBeam performs a complete design for flexure and shear and the outputs the resulting reinforcement schedules (including bar numbers, sizes, lengths, and...
Newly upgraded to ACI 318-08 and renamed from pcaSlab and ADOSS, spSlab v3.00 is highly efficient and widely used for analysis, design and investigation of reinforced concrete floor systems. Save in both material and labor using the moment redistribution feature. It allows up to 20% reduction of negative moments over supports reducing reinforcement congestions in these areas. spSlab analyzes beams, one-way slab systems (including standard and wide module joist systems), and two-way slab systems (including waffle and slab bands). With capacity to integrate up to 20 spans and two cantilevers of multiple floor system types in each model, the capabilities of spSlab are not limited to new designs. spSlab can perform strength investigation for evaluation and/or modifications of existing building...
The PROKON suite of structural analysis and design software is developed by engineers for engineers. Used worldwide in more than eighty countries, the suite provides quick and reliable answers to everyday structural and geotechnical engineering problems:-Frame and finite element analysis.-Steel member and connection design.-Reinforced and prestressed concrete design.-Reinforced concrete detailing.-Timber member design.-Masonry design.-Geotechnical analysis.-And various other useful applications Supported steel design codes:-AISC – 1989 ASD.-AISC – 1993 LRFD.-AS 4100 – 1998.-BS5950 – 1990.-BS5950 – 2000.-CSA-S16.1 – M94.-Eurocode 3 – 1992.-GBL 17 – 1988.-IS800 – 1984.-SABS0162 – 1984 (allowable stress design).-SABS0162 – 1993 (limit state design). Supported concrete design codes:-ACI 318-95.-BS 8110 – 1985.-BS 8110 – 1997.-CP 65 – 1999.-CSA-A23.3-94.-Eurocode 2 – 1992.-IS:456 – 2000.-AS 3600 – 2001.-HK Concrete – 2004.-SABS...
Encom is proud to release ModelVision Pro 9.0, which continues the tradition in software releases of presenting innovative modelling techniques for magnetics and gravity data. This exciting release of the industry standard in potential feld modelling software allows the extraction and utilisation of more information from new generation instrumentation and effcient semi-automation of target and regional area modelling. New FeaturesAt a glanceJoint InversionModelVision is now capable of inverting on multiple sensor channels from modern instruments including cross-wing gradiometers full tensor gravity and magnetic gradiometers, and multi-component fuxgate arrays. Joint inversion supports the elliptical pipe, tabular body and circular pipe.New Circular Pipe BodyA new body type has been introduced which contains two less parameters than the elliptical pipe.Data Wizard Drawing a...
PetrisWINDS Recall Overview PetrisWINDS Recall is the industry-leading solution for handling, storing and processing well bore data. It is established as an industry standard database with many clients adopting Recall at a corporate level. The design of PetrisWINDS Recall is the result of the integration of geological, geophysical and petrophysical data in a geoscientific environment and its scope extends well beyond the simple wire-line well log data. The system provides comprehensive history tracking, identifying work flow, and maintenance of key environmental information. One key feature of PetrisWINDS Recall is its tight coupling with a number of applications and utilities; click the link above for PetrisWINDS Recall G&G Applications to learn more about these industry-leading applications and utilities for the processing,...
High-Level Algorithm Implementation for FPGAs and ASICs The Synplify DSP tool provides a unique high-level synthesis methodology that realizes significant productivity and portability advantages. System and algorithm designers can quickly capture complex algorithmic behavior using the Synplify DSP library. The Synplify DSP synthesis engine allows designers to automatically implement and explore area/speed optimized RTL implementations from a single model. This eliminates the burden of hand-coding functions and architectural optimizations and results in significantly faster design capture, speeds time-to-market, and enables rapid design exploration for improved quality and lower cost.product:Synopsys DSP 2009.03 Win SP1 Lanaguage:english Platform:Winxp/Win7 Size:58MB
Emergent Game Technologies（以下简称Emergent）於2009/03/25-27在旧金山游戏开发者大会GDC，首次公开推出专为游戏设计量身打造的最新产品Gamebryo Lightspeed，这将是游戏开发技术的一个飞跃，不仅能帮助开发人员快速建立游戏原型，从而简化游戏开发与数据驱动的框架，并且全新升级运算速度与即时更新，为游戏产业打开另一波新视野。同时Emergent也宣布Gamebryo Lightspeed即将到访中国，并为中国的游戏开发者做更详细的介绍。 此外，特别值得提出的是，GameBryo LightSpeed已经和Scaleform GFX 3.0做了完美的集成，用户无需为此再做任何程序接口方面的开发工作。 关於GAMEBRYO LIGHTSPEED Emergent的宗旨主要是创建能灵活并强大的游戏引擎，并提供众多的设计方案，使开发人员可以把重点放在创造游戏，而不需要耗费时间在测试引擎。由於目前市场上的游戏引擎，仅提供了垂直方向分段开发游戏的选项，然而全新版本的Gamebryo Lightspeed允许开发者在PC平台或者任何Console平台上创建任何的游戏类型，包括从游戏原型到最后的游戏产品，这对游戏开发者带来极大的优势，同时缩短项目时间及降低开发的风险。 Gamebryo Lightspeed支持快速迭代的数据驱动的处理方式，方便用户不需要重新编译代码，就能实时看到修改或创建游戏对象的特性、参数和外观后的结果。 Gamebryo Lightspeed以先进的脚本和工具使开发团队里的每个成员，在开发过程可以更有效率。游戏设计人员可以直接执行和尝试各种游戏可玩性的改变；美术人员可以将内容放至进去，并即刻看到当前编译版本环境的具体效果；程序员可以依照任何需求，尽情的添加内容；制作人可以无需等待每天完成的版本编译，就能够看到游戏开发内容的当前状态。 过去的观念告诉我们，一个专业级的游戏引擎，如果必须要同时具备又快、又好、又便宜的条件，几乎是不可能的，但现在Gamebryo Lightspeed的出现，将一切不可能化为可能的！ 关於Scaleform GFx Scaleform GFx是一个高效用户(UI)界面解决方案，可用来快速创建针对硬件加速矢量扩展图形的用户界面。Scaleform GFx支持Flash Studio，美术人员无需再去掌握新的界面或动画开发工具，同时它还提供从Flash Studio直接到游戏用户界面的无缝视觉开发路径。 GFx 3.0包含一个新的技术CLIK，通过CLIK帮助没有专门Flash工程师的客户，快速创建和修改游戏界面，并且其适合开发复杂的MMO 用户界面，这将大大降低客户使用GFX 3.0的门槛，缩短开发周期，降低开发的技术风险。Product:Emergent Gamebryo LightSpeed 3.0 Lanaguage:English Platform:/WinNT/2000/XP Size:4.45G